Radiator Seal HP 300ml

Protection for all water-cooled systems of older designs without dirt strainers.

Uses / Areas of Use:

• For hairline cracks in radiator, engine block or cylinder head.
• In the event of leaking hose connections.
• In the event of defective head gaskets.
• Mixes with all conventional antifreezes and coolants.
• Also suitable for closed cooling systems.
• Caution: If there are any dirt strainers in the cooling system,
  Radiator Seal must not be used.

Application:
Shake can well before use. Add contents of can to warm coolant. Open heating valves and run engine for at least 10 minutes. Check coolant level and inspect for leaks.

Dosage:
Sufficient for 10 litres of coolant. Maximum mixture ratio for lorries is 1 to 100.